Subject: Alinco DJ-G5T Mods Kevin Bednar (bednark@garden.net) writes: To extend the TX (RX is already extended) do the following: 1) Remove the 4 screws that hold the back cover of the unit on. 2) CAREFULLY pry the case apart (It's helps to remove the VFO/Mem/etc knob first) 3) On the FRONT portion (DTMF Pad) of the case, in the upper right-hand corner you will see a BLUE wire. Cut that carefully. 4) Reassemble the unit. 5) While holding the FUNC key, press POWER to reset the unit. 6) Viola! You know have extended TX! Hope this helps all DJ-5GT users. Sincerely, Kevin Bednar KB2YPU