Newsgroups: rec.radio.amateur.misc From: keithm@wicat.com (Keith McQueen) Subject: Mod for Kenwood TW-4000 for CAP Message-ID: <1992Nov6.173126.8068@wicat.com> Summary: CAP mod for Kenwood TW-4000 Keywords: mod, tw-4000 Organization: WICAT Systems Date: Fri, 6 Nov 1992 17:31:26 GMT Lines: 20 I tried to e-mail the gent who needed the mod for the Kenwood TW-4000 for CAP for his friend. I bounced with unknown host. Since mods are fairly general interest anyway, I decided to just post it. ------------------------------ On the back of the CPU assembly, (part of the front panel assembly), there is a wire jumper (sort of a loop of wire between two pads on the board). If you clip this wire, and reset the CPU, the '4000 will RX-TX from 141.0 Mhz to 150.995 Mhz. There is no change on UHF. Let me know if this helps. -- Keith McQueen, Wicat Systems Inc. , (801)224-6400 | My opinions are | Packet: n7hmf @ nv7v.UT.USA.NA | all mine... | Internet: keithm@wicat.com | ...so there! |